Certainly not a 'must have' option on the Mustangs, and it would have been nice had Ford made the taillights sequential on all the Mustangs, but it's a nice little upgrade to do.
Took me less than half an hour to do both taillights, removing the rear-most trunk panel (four clips and two large plastic screws) makes it very easy, three nuts on each taillite, disconnect the harness, pull the taillite off, swap the bulbs over, put the new harness on, push the harness grommet in, (needs a little fiddling) and then put back together. It is SO easy, all the taillight bulbs are the same, so you can't even do that wrong. I used an 11mm socket and a small screwdriver.
Now I have sequential lights, and even the remote lock feature blinks the lights sequentially on both sides.
I like it. Nice thing to do if you can find a pair of these cheaper than the $139 somewhere.Get more detail about Mustang Sequential Tail Lights.
No comments:
Post a Comment